Super Glossy Series Bubble Free Car Wrap Vinyl

The Super Glossy Car Wrap Vinyl is rich in colors and has a variety of colors to choose from, and their color is very close to the original car paint. The surface leather is made of PVC material, and the back of the leather is equipped with the air bubble free channel, which can discharge air bubbles while being easy to operate. The glue is completely removable and will not damage the original paint when the appearance of the car is changed.

（Super Glossy Tiffany）

(Super Glossy Grey)

(Super Glossy Black) 

Operation method:

Tools used: Watering can, Clean rag, Scraper, Utility knife, Heat gun, Locator

1. Clean the surface to be pasted. Before preparing to paste the paper, spray the glass water evenly on the surface to be pasted (after cleaning the body, use a watering can to spray water on the body part to be pasted), and adjust the position of the color film for easy operation.

2. After determining the position that needs to be pasted, lift up one side with the car sticker from right to left (or from top to bottom) and press it on the car watch with a rag, and then stick it and flatten it with the rag while pressing it. Uncover the bottom paper.

3. When encountering door handles or anti-collision strips, cut the materials and pack or load them away according to the situation.

4. Adjust at the right time. After determining the approximate position of the graphics, use the scraper to repeatedly scrape off the water and air bubbles. When using the scraper, scrape diagonally from right to left.

5. In case of car doors and seams, use a utility knife to evenly divide and paste them inward.

6. Try to let the water in the car wrap vinyl dry out, and use the heat gun to moderately heat and dry it.